FiiO, popular for its audio products and accessories today launched its FiiO X3 Mark III Hi-Res portable lossless music player, its 3rd edition of the X3 player, FiiO F5 Hi-Res In-Ear Monitors with Microphone and in-line controls and FiiO i1 Apple Lightning Amplifier & DAC with Microphone and in-line controls in India.
The FiiO X3 Mark III had been fully upgraded and improved from the perspectives of appearance design and hardware specifications compared to X3 2nd gen. It inherits the design language of previous FiiO X-series players with five-button and scroll wheel layout. It has new balanced output that gives a broader soundstage, features Dual DACs, supports Bluetooth 4.1 and hasdual-mode Bluetooth; Multifunction Line Out/Coaxial Output with support for D2P and DoP.
FiiO X3 Mark III specifications
- 2.31-inch (320 x 240 pixels) display with tempered glass protection
- 192KHz/32-bit Hi-Res audio support
- Ingenic JZ4760B SoC, PCM5242 x 2 DAC, OPA2140 LPF, OPA1622 OP
- Dual-Mode Bluetooth 4.1 support
- Lossless: DSD：DSD64（.iso, .dsf.dff; APE(Fast): 192 kHz/24 bit; APE(Normal): 96 kHz/24 bit; APE (High): 96 kHz/24 bit; FLAC: 192 kHz/24 bit; WAV: 192 kHz/32 bit; Aiff：192 kHz/32 bit; Aif:192 kHz/24 bit;
WMA Lossless: 48 kHz/24 bit (to be supported by future update); Apple Lossless: 192 kHz/24 bit - Up to 256GB microSD expansion slot
- 3.5mm audio jack, 2.5mm balance port
- Dimensions: 114x59x12.8mm; Weight: 126
- 2350mAh battery with up to 10 hours of playtime
The F5 is Hi-Res In-Ear Monitors is Apple MFi certified and enables the in-line remote controls on the 3.5mm single ended cable can be compatible with iOS devices and most Android devices. It has carry case and outer shell has rugged polycarbonate, while the inside employs soft TPU (thermoplastic polyurethane).
FiiO F5 specifications
- Frequency Response: 20 Hz – 40 kHz
- Driver Size and Type: (13.6mm) Dynamic
- Impedance: 32 ohms
- Sensitivity: 102dB/mW
- Maximum Input Power: 100mW
- Cord Length: 1.2m
- Plug Type: 3.5mm TRRS, Gold plated
- Weight: Approx. 21 grams
The FiiO i1 is Apple MFi certified, digital-to-analog converter (DAC) and headphone amplifier designed for the Lightning connector. The digital audio signal enters through the Lightning connector end that can be connected to the Apple iPhone/iPod/iPad (and other Apple products), while the analog audio signals are pushed out through the 3.5mm output.
It also automatically detects if you are using a standard headphone or one with in-line controls. It high-sensitivity microphone and has three-button design allows you pause, play, and switch tracks, as well as answer the phone, adjust the volume, and a number of other operations.
The FiiO X3 Mark III comes in Black and Red colors and is priced at Rs. 14,990, the FiiO F5 is priced at Rs. 4,999 and the FiiO i1 costs Rs. 2,990.