After teasers, realme 13 Pro+ with the model number RMX3920 has been certified by TENAA / MIIT in China that reveals the design and the complete specifications of the phone.
This shows a curved screen, same as the predecessor, but the camera module is now in the centre with a golden ring around it. There are three cameras, and there is HYPERIMAGE+ text, as we had seen in the logo.
This is said to retain the Snapdragon 7s Gen 2 SoC from the predecessor, but get a new 50MP rear camera and a 50MP 3x periscope telephoto camera. It also reveals a slightly bigger 5050mAh battery and a faster 80W SuperVOOC charging.
realme 13 Pro+ rumoured specifications
- 6.7-inch (2412×1080 pixels) Full HD+ curved AMOLED screen with 120Hz refresh rate
- Up to 2.4GHz Octa Core Snapdragon 7s Gen 2 4nm Mobile Platform with Adreno 710 GPU
- 8GB / 12GB LPDDR4X RAM with 128GB / 256GB / 512GB (UFS 3.1) storage
- Dual SIM (nano + nano)
- Android 14 with realme UI 5
- 50MP main camera, OIS, 8MP ultra-wide camera with f/2.2 aperture, 50MP 3X periscope telephoto lens, LED flash
- 32MP front-facing camera with Sony sensor, f/2.45 aperture
- In-display fingerprint sensor
- USB Type-C audio, Stereo speakers, Dolby Atmos, Hi-Res Audio
- Dust and splash resistant (IP65)
- Dimensions: 161.3×73.9×8.2mm; Weight: 190g
- 5G SA/NSA, Dual 4G VoLTE, Wi-Fi 6 802.11 ax (2.4GHz + 5GHz), Bluetooth 5.2, Dual -frequency GPS/ GLONASS/ Beidou, USB Type-C
- 5050mAh (typical) battery with 87W SuperVOOC fast charging
realme has already started teasing the launch of the phone in India, so we can expect the phone sometime later this July, and the China launch is also expected around the same time.